FAQ
For Curious Minds
Q: Who is she? -->
A: That lovely-lass is a stock-photo model. We really don’t know who she is or how to reach her. Someday we hope to have our own photos here. Or maybe send us your LOOLUBE pics by finding us on Facebook.
WHAT IS LOOLUBE?


HOW IS LOOLUBE BETTER?
Friction = Not Good. Dry-wiping causes friction that can be abrasive and damage our most delicate skin! LooLube moisturizes and softens tissue-fibers to be less rigid and to gently conform to your skin’s unique surface.
LooLube has a mild-surfactant (soap) that lowers surface-tension to promote transit of “debris” on your skin. (it washes away poo sticking on your skin). Our surfactant is very mild. If you observe any skin irritation then dilute with water or discontinue use.

WHY NOT USE BABY-WIPES?
Baby-wipe usage has skyrocketed with adult usage. Their popularity is due to practicality. Baby-wipes are FANTASTIC for comfort and hygiene. However baby-wipes should NEVER be flushed. Although they may be advertised otherwise and indeed flush out-of-site, it’s well documented that baby-wipes do not sufficiently break-down after flushing. This results in clogged city-sewers and pipe damages requiring additional energy-inputs and labour at the risk of water-contamination.
Aside from being a good-citizen who NEVER flushes baby-wipes, you should use LooLube because:
it’s cost-effective
it’s is EASY and CONVENIENT
it creates less waste with a smaller eco-footprint
UR NOT A BABY!! So don’t use baby-wipes! LOL ?

IS LOOLUBE TESTED ON ANIMALS?
That’s ABSURD. LooLube was NOT tested on animals. LooLube was tested on human-volunteers. Don’t worry, LooLube is a natural product containing Aloe Vera which is valued for its health benefits as a moisturizer and anti-skin-irritant. We shared LooLube with friends & family and they were all delighted.

HOW DO YOU INSTALL?
Each includes an industrial strength sticker for adhesion to clean wall surfaces that are flat.
Installation instructions:- Clean wall surface
(remove dust & debris with damp cloth, allow wall to dry)
- Peel the sticker
- Mount the dispenser on the wall
(Press firmly against the wall in all directions)
- Wait 24 hours after mounting before filling the dispenser
(Be patient and allow the glue to cure. 3M glue scientists don't mess around)
(remove dust & debris with damp cloth, allow wall to dry)
(Press firmly against the wall in all directions)
(Be patient and allow the glue to cure. 3M glue scientists don't mess around)